Posted on

Plate Bearing Testing

To meet the needs of the increasing demand for offsite construction for modular structures, highlighted by the government’s awarding of £3bn modular schools framework, we have invested in another set of fully accredited plate bearing testing equipment for assessing the suitability of temporary foundations or siting crane outriggers.
 
Of course, for those larger projects, we can offer full geo-environmental investigations, topographic surveys, utility surveys, laboratory testing, infiltration testing and CBR testing, all using our own equipment.

For more information, please contact Steven Partridge – 01296 739413

Posted on

Rapid ‘CBR’ Testing

Clegg Impact Hammer

Let’s face it, sometimes you just need CBR results fast. Really fast. Maybe you need to identify any soft spots in a piling mat or in a road sub-base before the compaction plant leaves site. Or – be honest – maybe you just forgot to get the required testing done in time. Either way, we have a solution for you. We can test your sub-base using our Clegg Impact Hammer, typically completing 80+ tests in a day with results available immediately. Although the CBR value measurements aren’t as accurate as those obtained from a conventional test, we reckon they are acceptable for about 90% of the enquiries we receive.

For further information please contact Steven Partridge – 01296 739413

Posted on

Chilling Out at Heathrow

Terminal Four at Night

Working ‘airside’ at Heathrow Airport is always a challenge, but when our client contacted us requesting plate bearing testing of the ground prior to them lifting a new chiller refrigeration unit using a mobile crane at Terminal Four we were happy to help.

The only kind of chilling our engineer enjoyed was the cool breeze while he worked through the night to ensure our testing was completed safely, on time and on budget, allowing the aircraft stand to open in time for the first plane arrival.

Posted on

Somewhere Under The Rainbow….

Dynamic Sampling Rig
Dynamic Sampling in the Rain

……is our mini dynamic sampling rig! In fact, its photographed here having its oil checked during a day’s work at a site on the south coast.

The geotechnical survey, which comprised standard penetrations tests (SPTs), dynamic probing, CBR tests and plate bearing tests, was designed to allow the design of foundations for a leading supermarket chain’s new store.

The site had a history of industrial development so, not surprisingly, it was littered with large, buried concrete obstructions from previous structures (foundations, beams and piles). We will soon be returning to complete pile probing at each of the new pile locations to enable the augers of the piling machines to keep turning thus avoiding expensive standing time.

Hopefully it will have stopped raining by then…..and no, sadly, we didn’t find the pot of gold at the end of the rainbow.

Posted on

Plate Bearing Tests for Wind Turbines

Concrete Base for Turbine Tower

SSE Renewables, in partnership with the Port of Tilbury, is installing four wind turbines at Tilbury Port in Essex.  The project is currently under construction. Once complete, their wind power will provide 50% of the Port’s energy needs. But late on Wednesday the project ran into problems. No plate bearing tests had been carried out to assess the stability of the outriggers of the giant crane that would lift the turbine nacelle and blades into place. We were contacted at 1pm the following day and were on site within 2 hours. We completed plate bearing tests at each crane location and by the time we left site at 8.30pm the first crane was moving into position, the project back on track.

For more information or to arrange plate bearing testing, please contact Duncan Eastland Tel. 01296 739431

Posted on

What Do You Do on a Cold, Wet Saturday?

When one of our clients rang late in the week to ask if we could carry out some CBR testing on a motorway hard shoulder the next Saturday we should have checked the weather forecast before saying yes. Saturday saw high winds and torrential rain – but more importantly for our client, it also saw us complete the required CBR testing despite the weather conditions. Just for good measure we also carried out some Mackintosh probing at no additional cost.

Contract value <£1k

If you need CBR testing, Plate Bearing testing, dynamic probing or pile probing then please contact Duncan Eastland (Tel: 01296 739431).

Posted on

Is the Economy Starting to Improve?

Plate Bearing Test for Piling Rig Mat

OK we can’t really claim to be representative of the economy as a whole, but our recent workload suggests that construction activity is at last starting to pick up. In particular, our CBR and Plate Bearing teams have had their busiest month ever: in fact, they’ve been so busy that we have had to invest in more equipment to meet demand. We’re also seeing an upturn in demand for pile probing surveys which suggests that more constuction projects are getting into the ground. If you’d like to discuss your requirements for any of these services then please contact us here.

Posted on

CBR Testing for Highways

Our geotechnical site  teams have been kept busy this month carrying out in situ CBR testing for a major road development project in Essex. We have tested the density of the sub-base along the length of the highway extension, with each test accurately located using our Leica TotalStation surveying equipment.

Contract Value: <£10k.

For further information go to : CBR Testing or contact Duncan Eastland – 01296 739431